PN5180A0HN是NXP公司的一款非接觸式產品，PN5180A0HN是High-power NFC frontend solution，本站介紹了PN5180A0HN的封裝應用圖解、特點和優點、功能等，并給出了與PN5180A0HN相關的NXP元器件型號供參考。
PN5180A0HN - High-power NFC frontend solution - 非接觸式 - 讀卡器IC - 恩智浦, LLC
PN5180, the best full NFC frontend of the market.
As a highly integrated high performance full NFC Forum-compliant frontend IC forcontactless communication at 13.56 MHz, this frontend IC utilizes an outstandingmodulation and demodulation concept completely integrated for different kinds ofcontactless communication methods and protocols
The PN5180 ensures maximum interoperability for next generation of NFC enabled mobilephones. The PN5180 is optimized for point of sales terminal applications and implementsa high-power NFC frontend functionality which allows to achieve EMV compliance on RFlevel without additional external active components.
The PN5180 frontend IC supports the following operating modes: Reader/Writer mode supporting ISO/IEC 14443-A up to 848 kBit/s, MIFARE Reader/Writer mode supporting ISO/IEC 14443-B up to 848 kBit/s Reader/Writer mode supporting JIS X 6319-4 (comparable with FeliCascheme) Read/write mode supporting ISO/IEC 15693 Read/write mode supporting ISO/IEC 18000-3 Mode 3 ISO/IEC18092 (NFC-IP1) ISO/IEC21481 (NFC-IP-2) NFC-FORUM ISO14443-type A Card emulation up to 848 kBit/s
Enabled in Reader/Writer mode for ISO/IEC 14443-A, MIFARE the PN5180’s internaltransmitter part is able to drive a reader/writer antenna designed to communicate withISO/IEC 14443A, MIFARE cards and transponders without additional active circuitry. Thereceiver part provides a robust and efficient implementation of a demodulation anddecoding circuitry for signals from ISO/IEC 14443-A, MIFARE compatible cards andtransponders. The digital part handles the complete ISO/IEC 14443-A, MIFARE framing anderror detection (Parity and CRC).
The PN5180 supports all layers of the ISO/IEC 14443-B reader/writer communication scheme,given correct implementation of additional components, like oscillator, power supply,coil etc. and provided that standardized protocols, e.g. like ISO/IEC 14443-4 and/orISO/IEC 14443-B anticollision are correctly implemented by a host microcontroller.
Enabled in Reader/Writer mode for JIS X 6319-4, the PN5180 NFC frontend IC supports theFeliCa communication scheme. The receiver part provides a robust and efficientimplementation of the demodulation and decoding circuitry for JIS X 6319-4 codedsignals. The digital part handles the FeliCa framing and error detection like CRC. ThePN5180 supports JIS X 6319-4 contactless reader/writer communication using highertransfer speeds up to 424 kbit/s in both directions.
The PN5180 supports the vicinity protocol according to ISO/IEC 15693 and ISO/IEC 18000-3mode 3.
The PN5180 frontend IC supports the ISO/IEC18092 modes reader, P2P (NFC-IP1 and NFC-IP2)and type A card emulation.
In Card Operation mode, the PN5180 frontend IC is able to answer to a reader/writercommand according to the ISO/IEC 14443A/MIFARE card interface scheme. The Card OperationMode allows the PN5180 to act like an NFC Forum tag if this functionality is supportedby the host firmware.
One SPI-based host controller interface is implemented: Serial Peripheral Interface (SPI) with data rates up to 7 Mbit/s with MOSI,MISO, NSS and SCK signals Interrupt request line to inform host controller on events EEPROM configurable pull-up resistor on SPI MISO line Busy line to indicate to host availability of data for reading
- Transmitter current up to 250 mA
- Dynamic Power Control controls antenna current, RF power to deliver optimized RF performanceeven under detuned conditions. It maximizes transmitter current during detunedconditions and thereby compensates for any negative effects generated by nearbymetal, cards, or phones. The DPC ensures robust communication with smartcardsand smartphones, without using any additional external components
- Includes NXP ISO/IEC14443-A, Innovatron ISO/IEC14443-B and NXP MIFARE Crypto 1intellectual property licensing rights
- Full compliance with all standards relevant to NFC, contactless operation andEMVCo
- Automatic EMD handling for faster design of payment terminals
- Onboard Dynamic Power Control (DPC) for optimized RF performance, even underdetuned conditions
- Low-power card detection minimizes current consumption during polling
- Active load modulation supports smaller antenna with Card Emulation Mode
- Small, industry-standard packages
- NFC Cockpit GUI: software-independent register settings
- Development kit with 32-bit NXP LPC1769 MCU and antenna
- NFC Reader Library with source code ready for EMVCo L1 and NFC Forumcompliance
- Payment terminals
- Physical-access readers
- eGov readers
- Industrial readers
- High-performance readers
