PTN36001 is a small, low power SuperSpeed USB 3.0 redriver IC that enhances signal quality byperforming receive equalization on the deteriorated input signal followed by transmitde-emphasis maximizing system link performance for mobile applications. With itssuperior differential signal conditioning and enhancement capability, the devicedelivers significant flexibility and performance scaling for various systems withdifferent PCB trace and cable channel conditions.

PTN36001 is a dual-channel device that supports data signaling rate of 5 Gbit/s througheach channel. The data flow of one channel is facing the USB host, and another channelis facing the USB peripheral or device. Each channel consists of a high-speed Transmit(Tx) differential lane and a high-speed Receive (Rx) differential lane.

PTN36001 is powered from a 1.8 V supply and is available in a small X2QFN12 package (1.25mm × 2.1 mm × 0.35 mm) with 0.4 mm pitch.

• Supports USB 3.0 specification (SuperSpeed only)
• Compliant to SuperSpeed USB 3.0 standard
• Support of two channels
• Two control pins to select optimized signal conditions
  • Receive equalization on each channel to recover from InterSymbolInterference (ISI) and high-frequency losses, with provision tochoose equalization gain settings per channel
  • Transmit de-emphasis on each channel delivers pre-compensation suitedto channel conditions
  • Output swing adjustment
• Integrated termination resistors provide impedance matching on both transmit andreceive sides
• Automatic receiver termination detection
• Low active power: 200 mW/111 mA (typical) for VDD = 1.8 V
• Power-saving states:
  • 5.4 mW/3 mA (typical) when in U2/U3 states
  • 3.6 mW/2 mA (typical) when no connection detected
  • 10.8 μW/6 μA (typical) when in Deep power-saving state
• Excellent differential and common return loss performance
  • 10 dB differential and 10 dB common-mode return loss for 10 MHz to1250 MHz
• Flow-through pinout to ease PCB layout and minimize crosstalk effects
• Hot Plug capable
• Power supply: VDD = 1.8 V (typical)
• Compliant with JESD 78 Class II
• Very thin X2QFN12 package: 1.25 mm × 2.1 mm × 0.35 mm, 0.4 mm pitch
• ESD protection exceeds 7000 V HBM per JDS-001-2012 and 1000 V CDM perJESD22-C101
• Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA
• Operating temperature range: 0 °C to 85 °C

• Laptops, tablets
• Active cables
• Notebook/netbook/nettop platforms
• Docking stations and AIO platforms
• USB 3.0 peripherals such as flat panel display, consumer/storage devices,printers or USB 3.0 capable hubs/repeaters